Low Cost Apd Preamp Wideband Microwave Optical Receiver (MR11)

• Certification: CE
• Condition: New
• Name: Wideband Microwave Optical Receiver
• Model NO.: MR11
• Feature: Low Cost Apd Preamp
• Operating Wavelength Range: 1260~1620nm
• Wide Bandwidth: 40kHz~18GHz
• Minimum Sensitivity: </=-26.0dBm
• Maximum Overload: >/=-7.0dBm
• Approved: 3rd Party Certification
• Trademark: AITC
• Origin: China

Product Description

MR11
Low Cost APD Preamp Wideband Microwave Optical Receiver

Product description

MR11 series microwave wideband optical receiver, adopts high Sensitivity APD diode and Low Noise Preamplifier IC, within bandwidth of 40KHz~18GHz, they are featured with excellent linearity, high responsibility and superior flatness of the RF response in both, power and phase. They provide an outstanding linearity fiber optical communication for analogue wideband microwave application. Due to avoidance of using expensive coaxial cable or wave-guide, there will be no limitation in transmission distance, which improves the signal quality and reliability of the microwave communication. They can be widely applied in microwave communication system such as remote wireless, timing and reference signal distribution, telemetry, measurement and delay line etc as well as 10Gb/s high speed communication system.

Product features

1. Wide bandwidth 40KHz~18GHz

2. Maximum frequency optional: 6GHz, 10GHz, 15GHz, 18GHz

3. Superior flatness of RF response

4. High responsibility

5. High sensitivity, -27.5dBm typical

6. Low capacitance high speed InGaAs APD Photo detector

7. Low Noise GaAs Pre-amplifier IC

8. Full-transparency operation mode, suitable for all kinds of signal code, communication standard and network protocol

9. Powerful RS232 communication interface, perfect SNMP function, LCD status display.

10. Electromagnetic, RF, thunderbolt assistance

11. Four exterior structures available

12. Excellent P/P ratio


Main application

1. Antenna Remoting

2. Tracking, telemetry and control

3. Phased arrays

4. Delay lines

5. Microwave RF optical links

6. High speed lightwave characterization

7.10Gb/s, 12.5Gb/s communication systems

Performance				Min.	Typ.	Max.	Supplement
Optical feature	Operating wavelength range		(nm)	1260		1620
	Responsibility	R13	(A/W)	0.75	0.85		1310nm
		R15		0.8	0.9		1550nm
		R16			0.8		1610nm
	Dark current		(nA)		2	50
	Minimum sensitivity		(dBm)		-27.0	-26.0
	Maximum overload		(dBm)	-7.0	-5.0
	Optical return loss		(dB)	40
	Optical connector			SC/APC			Option FC/APC, LC/APC
RF feature	High frequency (cut-off -3dB)		(GHz)	6.0			MR11-06
				8.0			MR11-08
				10.0			MR11-10
				13.0			MR11-13
				15.0			MR11-15
				18.0			MR11-18
	-3dB Low frequency		(KHz)		40
	In-band ripple		(dB)			±1.5	≤10GHz
						±2.5	12~18GHz
	AC transimpedance		(Ω)	1000	4000		Pin=-25dBm
	RF return loss		(dB)	8
	RF output coupled				AC
	RF output connector			SMA-F or K-connector
General feature	Communication interface			RS232			MX, P3
	SNMP interface			RJ45			Network management
	Power supply	220VAC	(V)	90	220	265	1RU, 3RU, 2D
		-48VDC		-30	-48	-72	1RU, 3RU
		+12VDC		+11	+12	+12.5	MX
	Power consume		(W)			5	MX
	Operating temp.		(º C)	-40		+65
	Storage temp.		((º C)	-40		+85
	Relative humidity		(%)	5		95
	Size	1U		19×11.0×1.75 ( " ) 483×279×44 ( mm )			19" stander
		3U		19×14.5×5.25 ( " ) 483×368×133 ( mm )
		2D		12.4×13.0×3.5 ( " ) 315×330×89 ( mm )			Desk-top
		M1		5.7×3×1.1 ( " ) 145×75×28 ( mm )			With RS232
		M2		2.8×1.77×0.63 ( " ) 70×45×16 ( mm )			Without RS232